When SPAS ECU detects CAN BUS off state or CAN HW error state more than 10 times continuously, the SPAS ECU sets this DTC.
Item | Detecting Condition | Possible Cause | ||
DTC Strategy |
•
CAN BUS Line check | 1. Poor connection | ||
Enable Condition |
•
Supply voltage available | |||
Threshold Value |
•
The CAN BUS off state occurs more than 10 times continuously.
•
The CAN HW error state occurs more than 10 times continuously. | |||
Fail Safe | PAS ON & SPAS ON | PAS-LED | Error Flash | |
SPAS-LED | Off | |||
Speaker | Error Tone(Only H/Wiring Buzzer type) | |||
Cluster | System Fail(2s) -> Error PAS HMI indicator | |||
PAS ON & SPAS OFF | PAS-LED | Error Flash | ||
SPAS-LED | Off | |||
Speaker | Error Tone(Only H/Wiring Buzzer type) | |||
Cluster | Error PAS HMI indicator | |||
Detecting Time |
•
- | |||
Recovery Time |
•
- | |||
Recovery Condition |
•
Normal message received | |||
Test Cycle |
•
10ms | |||
