If control signal is out of specification, ECM sets DTC P226300.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Signal monitoring | 1. Poor connector connection 2. Open or short to power/ground in control circuit of E-VGT actuator 3. Faulty E-VGT actuator | |
Enable Condition |
•
Engine running | ||
Threshold Value |
•
PWM control signal frequency high/low or out of specification | ||
Detecting Time |
•
2 sec | ||
Fail Safe | MIL |
•
On | |
DPF Regeneration OFF |
•
Yes | ||
