If short in motor control circuit or short to power in control circuit of VSA is detected, ECM sets DTC P201000.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Voltage monitoring | 1. Open in control circuit of VSA 2. Short to power in control (+) circuit of VSA 3. Short to power in control (-) circuit of VSA 4. Faulty VSA | |
Enable Conditions |
•
Engine running | ||
Threshold Value |
•
Short in motor control circuit or short to power in control circuit of VSA | ||
Diagnostic Time |
•
2 sec. | ||
Fail Safe | MIL |
•
On | |
