If clutch switch signal is not detected while gear shift is detected, ECM sets DTC P0704. This fault might be caused by open or short to power/ground in circuit of clutch switch.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Signal monitoring | 1. Open or short to power/ground in signal circuit of clutch switch 2. Faulty clutch switch |
Enable Condition |
•
Vehicle speed is lower than 15 km/h (9.3 mph)
•
Brake switch signal "OFF"
•
Counter of gear shift detection is more than 10 times | |
Threshold Value |
•
Number of clutch switch operation is less than 2 times | |
Diagnosis Time |
•
- | |
MIL ON Condition |
•
- |
