If the sensor input signal is higher than 4.8V or the range of the MAP is higher than 110 kPa(1.1 bar/15.95 psi), the PCM sets DTC P0108.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Signal check, high | 1. Poor connection 2. Open or short to power in signal circuit 3. MAPS |
Enable Conditions |
•
Time duration for which signal voltage keeps over the threshold is higher than 3 sec. | |
Threshold Value |
•
Sensor voltage is higher than 4.58V | |
Diagnostic Time |
•
Continuous. | |
Mil On Condition |
•
3 driving cycles. |
