This DTC sets when the accelerator pedal sensor 2 (APS2) is out of range high.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
APS2 signal check, high | 1. Poor connection 2. Open or short to battery in signal circuit 3. Faulty APS |
Enable Conditions |
•
Ignition "ON" or Engine running | |
Threshold Value |
•
APS2 voltage greater than 2.5 V | |
Diagnostic Time |
•
0.14 sec | |
MIL On Condition |
•
5 sec |
