This DTC sets when the PCM can no longer detect the signal from the camshaft position sensor. (Exhaust)
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Sensor wrong mounted (check the assembling state) | 1. Poor connection 2. Abnormal assembling state 3. CMPS 4. CMPS incorrectly installed 5. Damaged CMPS shielding 6. CMPS circuit shorted to other CMPS circuits |
Enable Conditions |
•
No CKP sensor error
•
Gap of CKP sensor wheel detected | |
Threshold Value |
•
When counter of failure is detected toggling of phase signal level more than 5 times at consecutive gaps | |
Diagnostic Time |
•
Continuous. | |
Mil On Condition |
•
3 driving cycles |
