If the PCM detects abnormal signal of TPS, the PCM sets this DTC.
Item | Detecting Condition | Possible Cause | |
DTC Strategy | Case 1 |
•
Forced engine shut down | 1. TPS |
Case 2 |
•
Forced engine shut down - ADC | ||
Case 3 |
•
Forced engine shut down - communication | ||
Enable Conditions |
•
- | ||
Threshold Value | Case 1 |
•
Engine Speed is greater than threshold(accel, pedal) | |
Case 2 |
•
Test pulse voltage is greater than 3.29V or less than 3.0V
•
Null load test voltage is greater than 0.82V | ||
Case 3 |
•
Fault counter for communication error between function controller and monitoirng module is greater than 5 times | ||
Diagnostic Time | Case 1 |
•
0.8 sec. | |
Case 2 |
•
0.15 sec. | ||
Case 3 |
•
Immediately | ||
MIL ON Condition |
•
1 Driving Cycle | ||
