If the PCM detects abnormal signal of TPS and RPM, the PCM sets this DTC.
Item | Detecting Condition | Possible Cause | |
DTC Strategy | Case 1 |
•
TPS Fault | 1. TPS |
Case 2 |
•
RPM Calculation | ||
Enable Conditions | Case 1 |
•
- | |
Case 2 |
•
Engine Speed is greater than 520rpm | ||
Threshold Value | Case 1 |
•
Difference between TPS1 & TPS2 voltage is greater than 0.254V | |
Case 2 |
•
Difference between RPM calculated in Level2 and Level 1 RPM is greater than 320rpm | ||
Diagnostic Time | Case 1 |
•
0.52 sec. | |
Case 2 |
•
0.32 sec. | ||
MIL ON Condition |
•
1 Driving Cycle | ||
