3.
Perform "Actuation Test" for Fuel Pump.
Fig.1) Fuel Pump Relay Actuation Test
Connect GDS to Data Link Connector(DLC).
IG KEY "ON" & ENG "OFF".
Perform "Actuation Test" for Fuel Pump.
Fig.1) Fuel Pump Relay Actuation Test
Does the Fuel Pump operate properly? (Check variation)
 | ▶ Go to "Verification of Vehicle Repair" procedure. |
 | ▶ Carefully re-do this troubleshooting guide steps. ▶ If no problems were found with the circuits or connectors, replace the Fuel Pump Relay and go to "Verification of Vehicle Repair" procedure. |
