If The deviation between the value by LPC and the value by internal counting is over 20 sec or ECM detects an error on internal memory, ECM sets P2610.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Signal monitoring | 1. Poor connector connection 2. Faulty ECM/PCM | |
Enable Condition | Case1 |
•
Engine "ON" is higher than 10 sec
•
Battery voltage is higher than 8V | |
Case2 |
•
The internal memory is noraml | ||
Threshold Value | Case1 |
•
The deviation of value by LPC and the value by internal counting is higher than 10 sec | |
Case2 |
•
SPC is reset to "0" abnormally | ||
Diagnosis Time |
•
- | ||
MIL ON Condition |
•
2 driving cycles | ||
