ECM compares the MAPS output and calculated MAPS value while enable condition is met. If the acutal MAP value is higher than maximum threshold or lower than minimum threshold for a pre-determined time, ECM sets DTC P0106.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Rationality check | 1. Poor connector connection 2. Dirty air cleaner 3. Oil cap or dipstick missing or not installed propely or damaged 4. Air leak in intake system 5. Faulty Manifold Absolute Pressure (MAP) sensor 6. Faulty Throttle Position Sensor (TPS) |
Enable Condition |
•
At least 1 sec. after engine "ON"
•
No TPS error present
•
No CVVT error present
•
No signal error present | |
Threshold Value |
•
Intake manifold pressure value is higher than maximum threshold
•
Intake manifold pressure value is lower than minimum threshold
•
Stuck signal of intake manifold pressure detected | |
Diagnosis Time |
•
2 sec. | |
MIL ON Condition |
•
3 driving cycles |
