When the TPS2 sensor output voltage is higher than maximum threshold value for 0.14 sec. under enable condition, ECM sets DTC P0223 and turns the MIL on.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Signal monitoring | 1. Poor connector connection 2. Open or short to power in signal circuit 3. Open in ground circuit 4. Faulty TPS2 |
Enable Condition |
•
Ignition switch "ON" | |
Threshold Value |
•
TPS2 voltage is higher than 4.805V | |
Diagnosis Time |
•
0.14 sec. | |
MIL ON Condition |
•
5 sec. |
