The ECM sets DTC P0335 when the number of crankshaft teeth during one revolution is incorrect or crankshaft signal is missing while camshaft signal is detected.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Reference point monitoring | 1. Poor connector connection 2. Open or short in CKPS circuit 3. Damaged to the connecting flange or flywheel 4. Misadjust crankshaft and camshaft pulley position 5. Faulty CKPS |
Enable Condition |
•
- | |
Threshold Value |
•
No signal input detected
•
Gap position missed
•
Gap position is not found
•
Number of teeth between consecutive gaps are not correct | |
Diagnosis Time |
•
Continuous | |
MIL ON Condition |
•
2 Driving Cycles |
