If camshaft position sensor signal is not generated when crankshaft position sensor signal is generated, ECM sets DTC P034000. This fault might be caused by faulty CMPS or faulty circuit.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Signal monitoring | 1. Poor connector connection 2. Faulty CMPS circuit 3. Faulty CMPS | |
Enable Condition |
•
Engine running | ||
Threshold Value |
•
CMPS signal is not generated when CKPS signal is generated | ||
Detecting Time |
•
- | ||
Fail Safe | MIL |
•
On | |
ISG OFF |
•
Yes | ||
