P060500 is set when communication error between micro controller inside of ECM and EEPROM is detected or a different vision of ECM is installed.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Internal monitoring | 1. Poor connector connection 2. Faulty ECM | |
Enable Conditions |
•
Engine running | ||
Threshold Value |
•
ECU Reset
•
Faulty internal circuit of ECU
•
EEPROM error
•
Communication failure between micro controller inside of ECM and EEPROM | ||
Diagnostic Time |
•
- | ||
Fail Safe | MIL |
•
Off | |
