If crankshaft position sensor signal is not generated when camshaft position sensor signal is generated, ECM sets DTC P033500. This fault might be caused by defected CKPS or faulty circuit. If fault is detected during vehicle operating condition, ECM calculates CKPS signal with CMPS signal.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Signal monitoring | 1. Poor connector connection 2. Faulty CKPS circuit 3. Faulty CKPS | |
Enable Condition |
•
Engine running | ||
Threshold Value |
•
No crankshaft signal available | ||
Detecting Time |
•
- | ||
Fail Safe | MIL |
•
On | |
Torque Limit |
•
Yes | ||
Auto Cruise OFF |
•
Yes | ||
ISG OFF |
•
Yes | ||
