If abnormal signal of CKPS is detected, ECM sets DTC P033600. This fault might be caused by poor connector connection, faulty sensor or tone-wheel.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Signal monitoring | 1. Poor connector connection 2. Faulty CKPS circuit 3. Faulty flywheel tone-wheel 4. Faulty CKPS | |
Enable Condition |
•
Engine running | ||
Threshold Value |
•
Abnormal CKPS signal is detected | ||
Detecting Time |
•
- | ||
Fail Safe | MIL |
•
On | |
Torque Limit |
•
Yes | ||
Auto Cruise OFF |
•
Yes | ||
ISG OFF |
•
Yes | ||
