If abnormal signal of CMPS is detected, ECM sets DTC P034100. This fault might be caused by poor connector connection, faulty sensor or tone-wheel.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Signal monitoring | 1. Poor connector connection 2. Faulty CMPS circuit 3. Faulty tone-wheel 4. Faulty CMPS | |
Enable Condition |
•
Engine running | ||
Threshold Value |
•
Abnormal CMPS signal is detected | ||
Detecting Time |
•
- | ||
Fail Safe | MIL |
•
On | |
ISG OFF |
•
Yes | ||
