If the injector IQA data error or saved data is corrupted in EEPROM, ECM sets DTC P167000.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Internal monitoring | 1. Poor connector connection 2. No IQA code is written 3. Faulty ECM | |
Enable Conditions |
•
Ignition switch "ON" | ||
Threshold Value |
•
IQA data error is detected
•
No IQA code is written | ||
Diagnostic Time |
•
Immediately | ||
Fail Safe | MIL |
•
Blink | |
