The deviation of the camshaft position from the target point is evaluated during stable driving condition. The ECM accumulates this deviation for a certain period and sets DTC P0011 when the accumulated deviation is too high. The target camshaft position is predetermined value depending on engine speed and throttle angle in the ECM.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Internal monitoring | 1. Poor connector connection 2. Faulty ECM | |
Enable Conditions |
•
Engine running | ||
Threshold Value |
•
NTP error or voltage error in ADC monitoring or ADC test error is detected | ||
Diagnostic Time |
•
- | ||
Fail Safe | MIL |
•
Blink | |
