If unused code is inputted, PCM sets DTC P0705.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Circuit Monitoring | 1. Poor Connector Connection 2. Defected Inhibitor Switch Circuit 3. Defected Inhibitor Switch 4. Defected PCM |
Enable Conditions |
•
Ignition "ON"
•
Normal Battery Voltage | |
Threshold value |
•
Unused code is detected | |
Detecting Time |
•
Limp home mode (shift 3rd ~ 6th gear is OK but 1st, 2nd gear not engaged) | |
Fail safe |
•
4 Sec. | |
MIL ON Condition |
•
2nd Driving Cycle |
