TCM set this code when gear is not correct engaged.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Not enough motion of select 2 solenoid while engaging gear | 1. Defected Gear select assembly 2. Defected DCT 3. Mechanical failure on gear2 select direction |
Enable Condition |
•
When R gear is engaged
•
Battery Voltage higher than 10V
•
No electrical failure on select solenoid 2 | |
Threshold Value |
•
Select solenoid 2 position error is over 1mm | |
Fail Safe |
•
Drive at Odd gear | |
Detecting Time |
•
3 events | |
MIL ON Condition |
•
- |
