TCM set this code when gear is not correct engaged.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Not enough motion of select 1 solenoid while engaging gear | 1. Defected Gear select assembly 2. Defected DCT 3. Mechanical failure on gear1 select direction |
Enable Condition |
•
When 7ed gear is engaged
•
Battery Voltage higher than 10V
•
No electrical failure on select solenoid 1 | |
Threshold Value |
•
Select solenoid 1 position error is over 1mm | |
Fail Safe |
•
Drive at Even gear | |
Detecting Time |
•
3 events | |
MIL ON Condition |
•
2nd Driving Cycle |
