Component Inspection
1.

Ignition "OFF"

2.

Disconnect Battery (-) terminal.

3.

Refer to "Shop Manual" and disconnect input speed sensor connector.

4.

Measure resistance between Pin No. 4 (Power) terminal and Pin No. 5 (Signal) terminal of input speed sensor.

Specification : Approx. 2.7 MΩ

5.

Is measured value within specification?

▶ Carefully re-do this troubleshooting guide steps.

▶ If problem still occurs, replace TCM and then go to "Verification of Vechicle Repair" procedure.

▶ Carefully re-do this troubleshooting guide steps.

▶ If problem still occurs, replace Input Speed Sensor and then go to "Verification of Vechicle Repair" procedure.

Яндекс.Метрика