TCM set this code When detected Clutch Actuator2 is stuck off.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Check the Clutch position | 1. Clutch 2 motor Fault 2. Actuator stuck off |
Enable Condition |
•
Battery voltage above 9V
•
Engine speed above 400rpm
•
Clutch target transfer torque above 100Nm | |
Threshold Value |
•
Slip speed above 1000 rpm
•
Actual transfer torque below 10Nm | |
Detecting Time |
•
1 second | |
Fail Safe |
•
Drive at Odd gear |
