TCM set this code when gear is not correct engaged.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Check the engagement | 1. Defected DCT |
Enable Condition |
•
Verification of reference position successful
•
Abs (actual input shaft speed – target input shaft speed) > 150rpm
•
Target Gear = 1st gear
•
Shift position is in engagement zone | |
Threshold Value |
•
TCM set this code when gear is not correct engaged | |
Fail Safe |
•
Skip the error gear | |
Detecting Time |
•
3 events | |
MIL ON Condition |
•
2nd Driving Cycle |
