TCM set this code When output voltage is out of available range or receive error information from driver I.C.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Check the voltage | 1. Gate Select Actuator Fault 2. Gate Select Actuator Solenoid circuit open/short |
Enable Condition |
•
Power supply Voltage to Motor greater than 9 V
•
Select 2 push sol. ON | |
Threshold Value |
•
High side voltage less than 3 V | |
Detecting Time |
•
0.1 second | |
Fail Safe |
•
Drive at Odd gear |
