Release Residual Pressure in Fuel Line
caution

There may be some residual pressure even after “Release Residual Pressure in Fuel Line” work, so cover the hose connection with a shop towel to prevent residual fuel from spilling out before disconnecting any fuel connection.

1.

Turn the ignition switch OFF and disconnect the battery (-) cable.

2.

Remove the rear seat cushion.

(Refer to Body - "Rear Seat Assembly")

3.

Remove the service cover (A) after loosenig the screws (B).

4.

Disconnect the fuel pump connector (A).

5.

Connect the battery (-) cable.

6.

Start the engine and let idle, and then turn the ignition switch OFF after the engine has stopped on its own.

Яндекс.Метрика