4.
Remove the control cable (B) from the control shaft after removing the pins (A).
Move the shift lever to neutral gear position.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
Remove the control cable (B) from the control shaft after removing the pins (A).
Remove the control shaft complete (A).
Tightening torque :
19.6 ~ 26.5 N.m (2.0 ~ 2.7 kgf.m,14.5 ~ 19.5 lb-ft)
