Inspection
1.

Remove the air cleaner assembly.

(Refer to Engine Mechanical System - "Air Cleaner")

2.

Remove the battery and battery tray.

(Refer to Engine Electrical System - "Battery")

3.

Disconnect the back up lamp switch connector (A).

4.

Check the continuity between power terminal and signal terminal.

Specification : Approx. below 1Ω

Removal
1.

Remove the air cleaner assembly.

(Refer to Engine Mechanical System - "Air Cleaner")

2.

Remove the battery and battery tray.

(Refer to Engine Electrical System - "Battery")

3.

Disconnect the back up lamp switch connector (A).

4.

Remove the back up lamp switch (A).

Tightening torque :

39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

Installation
1.

Install in the reverse order of removal.

note

The back-up lamp switch must be replaced with new one. (Do not reuse it.)

Яндекс.Метрика