2.
Remove the gear boots (A) and then remove the shift lever knob (B) by rotating counter-clockwise.
Disconnect the battery negative (-) cable.
Remove the gear boots (A) and then remove the shift lever knob (B) by rotating counter-clockwise.
Remove the floor console assembly.
(Refer to Body - " Floor Console")
Remove the bracket (A).
Remove the select cable (A) from the shift lever after removing the snap pin.
Remove the shift cable (B) after removing the clip (A).
Remove the cable sockets (A) from the shift lever.
Remove the shift lever assembly (A).
Tightening torque :
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft
Install in the reverse order of removal.
