2.
Disconnect the inhibitor switch connector (A).
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
Place the gear shift lever and manual control lever to the N position when performing maintenance on the inhibitor switch.
Disconnect the inhibitor switch connector (A).
Remove the shift cable mounting nut (A).
Tightening torque:
9.8 ~ 14.7 N.m (1.0 ~1.4 kgf.m, 7.2 ~ 10.8 lb-ft)
Loosen the nut (A), and then remove the manual lever (B).
Loosen the mounting bolt, and then remove the inhibitor switch (C).
