5.
Disconnect the clutch actuator motor connector (A).
Turn off the ignition switch and then disconnect the battery (-) cable.
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
Remove the ECM.
(Refer to Fuel System - "Engine Control Module (ECM)")
Disconnect the clutch actuator motor connector (A).
Loosen the mounting screw, and then remove the clutch actuator motor (A).
Tightening Torque :
4.4 ~ 5.4 N.m (0.45 ~ 0.55 kgf.m, 3.3 ~ 4.0 lb-ft)
