3.
Remove the shift cable (A).
Remove the floor console assembly.
(Refer to Body - "Floor Console")
Remove the air duct.
Remove the shift cable (A).
Remove the retainer (A) after loosening the nuts (B).
Tightening torque:
11.8 ~ 14.7 N.m (1.2 ~1.5 kgf.m, 8.7 ~ 10.8 lb-ft)
Remove the nut (C) from the manual control lever.
Tightening torque:
9.8 ~ 14.7 N.m (1.0 ~1.4 kgf.m, 7.2 ~ 10.8 lb-ft)
Remove the cable (B) from the cable bracket (A) on the Dual Clutch Transmission (DCT). Then, remove the shift cable by pulling it toward the vehicle interior.
Remove the shift cable by pulling it toward the interior.
Install in the reverse order of removal.
Install the cable after placing the shift lever and the transmission manual control lever in the N position.
Tighten the nut (A) to the specified torque after removing free play by pushing the shift cable in the direction of the arrow.
