Remove the fuel pump.

(Refer to Fuel Delivery System - “Fuel Pump”)

Disconnect the fuel sender connector (A) and fuel pump connector (B).

Disconnect the fuel feed tube quick-connector (A) after remove the fixing clip (B).

Remove the cushion pipe fixing clip (A), and then separate the head assembly (B) from reservoir cup.

Lift the fixing hook (A) by using a common driver, and then remove the fuel sender (B).

Remove the reservoir cup (B) after releasing the fixing hooks (A).

Disconnect the ground pin (A).

Remove the free-filter (A) after releasing the fixing hooks.

Releasing the fixing hook (A).

Remove the fuel pressure regulator (A).

Remove the fixing clip (A), and then assist pump assembly (B).

Separate the electric pump motor (A).

Replace new fuel filter.

Install in the reverse order of removal.