4.
Remove the installation nut (B-2ea), and then disconnect the fuel feed tude (A).
Release the residual pressure in fuel line.
(Reter to Fuel Delivery System - "Release Residual Pressure in Fuel Line")
Turn the ignition switch OFF, and then remove the battery negative (-) terminal.
Remove the air cleaner.
(Refer to Engine Mechanical System - "Air Cleaner")
Remove the installation nut (B-2ea), and then disconnect the fuel feed tude (A).
Disconnect the vapor hose (A) which is connected from the PCSV.
Remove the fuel tank.
(Refer to Fuel Delivery System - "Fuel Tank")
Remove the sub frame.
(Refer to Suspension System - "Sub Frame")
Release the brake pipe after disconnect the the brake pipe line (A).
After installation, bleed the brake system.
(Refer to Brake System - Operation and Leakage Check - "Bleeding of Brake System")
Remove the fixing clips (A).
Remove the brake & fuel line protect (A).
Remove the fuel line (A).
