Connect the GDS on the Data Link Connector (DLC).
Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T.
Item | Opening Percentage (%) | Output Voltage (V) [Vref = 5V] | |
TPS1 | C.T | 8.5 ~ 11.5 | 0.43 ~ 0.58 |
W.O.T | 88 ~ 96 | 4.40 ~ 4.80 | |
TPS2 | C.T | 88.5 ~ 91.5 | 4.43 ~ 4.58 |
W.O.T | 2 ~ 10 | 0.10 ~ 0.50 | |
Turn the ignition switch OFF.
Disconnect the ETC module connector.
Measure resistance between the ETC module terminals 3 and 6.
Check that the resistance is within the specification.
Specification: 0.3 ~ 100 Ω [20℃(68℉)]
