Release the residual pressure in fuel line.

(Refer to “Release Residual Pressure in Fuel Line” in this group).

Turn the ignition switch OFF and disconnect the battery negative (-) terminal.

Disconnect the injector connector (A).

Remove the wiring harness after loonsening the mounting bolts (B).

Remove the engine room cover mounting bracket (A).

Remove the PCV hose (B).

Disconnect the fuel feed tube (A) after loosening the mounting nuts (B).

Remove the delivery pipe & injector assembly (A) after loosening the mounting bolts.

Remove the fixing clip (A), and then separate the injector from the delivery pipe.