4.
Remove the knock sensor (A) after loosening the mounting bolt.
Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
Remove the intake manifold.
(Refer to Engine Mechanical System - "Intake Manifold")
Remove the delivery pipe.
(Refer to Fuel Delivery System - "Delivery Pipe")
Remove the knock sensor (A) after loosening the mounting bolt.
Install the component to the specified torques.
Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
Install in the reverse order of removal.
Knock sensor mounting bolt:
18.6 ~ 23.5 N.m (1.9 ~ 2.4 kgf.m, 13.7 ~ 17.4 lb-ft)
