Removal
warning

DO NOT remove the camshaft position sensor while the engine is running or immediately after turning off the engine as the part and engine oil are hot and can cause burns.

[Bank 1 / Intake]
1.

Turn the ignition switch OFF and disconnect the battery negative (-) terminal.

2.

Disconnect the camshaft position sensor connector (A).

3.

Remove the sensor by loosening the mounting bolt (B).

[Bank 1 / Exhaust]
4.

Turn the ignition switch OFF and disconnect the battery negative (-) terminal.

5.

Remove the battery.

(Refer to Engine Electrical System - "Battery")

6.

Disconnect the camshaft position sensor connector (A).

7.

Remove the sensor (A) by loosening the mounting bolt (B).

Яндекс.Метрика