4.
Remove the connector (A), and then separate the injector (B) from the delivery pipe.
When removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there is potential risk of injury caused by leakage of the high pressure fuel. So, do not work on related parts immediately after engine stops.
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - “Release Residual Pressure in Fuel Line”)
Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
Remove the delivery pipe & injector assembly.
(Refer to Fuel Delivery System - “Delivery Pipe")
Remove the connector (A), and then separate the injector (B) from the delivery pipe.
