Items | Specification | |
Fuel Tank | Capacity | 53 L (14.0 U.S. gal, 56.0 U.S. qt, 46.6 lmp. qt.) |
Fuel Filter | Type | Paper type |
Fuel Pressure | Low Pressure Fuel Line | 480 ~ 520 kPa (4.9 ~ 5.3 kgf/cm² , 69.6 ~ 75.4 psi) |
High Pressure Fuel Line | 2 ~ 20 MPa ( 20.4 ~ 203.9 kgf/cm² , 290.1 ~ 2900.8 psi) | |
Fuel Pump | Type | Electrical, in-tank type |
Driven by | Electric motor | |
High Pressure Fuel Pump | Type | Mechanical type |
Driven by | Camshaft |
Item | Opening Percentage (%) | Output Voltage (V) [Vref = 5V] | |
TPS1 | C.T | 8.5 ~ 11.5 | 0.43 ~ 0.58 |
W.O.T | 88 ~ 96 | 4.40 ~ 4.80 | |
TPS2 | C.T | 88.5 ~ 91.5 | 4.43 ~ 4.58 |
W.O.T | 2 ~ 10 | 0.10 ~ 0.50 | |
Fail Safe | Throttle valve stuck at 5° | ||
Supply Voltage (V) | 4.8 ~ 5.2 | ||
Type | Hall IC Non-contact sensor [Integrated into ETC Module] |
▷ Type: Piezo-resistive pressure sensor type
Pressure [kPa (kgf/cm², psi)] | Output Voltage (V) [Vref = 5V] |
32.5 (0.33, 4.71) | 0.5 |
284 (2.90, 41.19) | 4.5 |
▷ Type: Thermistor type
Temperature | Resistance (㏀) | |
℃ | ℉ | |
-40 | -40 | 40.93 ~ 48.35 |
-30 | -22 | 23.43 ~ 27.34 |
-20 | -4 | 13.89 ~ 16.03 |
-10 | 14 | 8.5 ~ 9.7 |
0 | 32 | 5.38 ~ 6.09 |
10 | 50 | 3.48 ~ 3.90 |
20 | 68 | 2.31 ~ 2.57 |
30 | 86 | 1.9 ~ 2.1 |
40 | 104 | 1.08 ~ 1.21 |
50 | 122 | 0.76 ~ 0.85 |
60 | 140 | 0.54 ~ 0.62 |
70 | 158 | 0.40 ~ 0.45 |
80 | 176 | 0.29 ~ 0.34 |
90 | 194 | 0.22 ~ 0.26 |
100 | 212 | 0.17 ~ 0.20 |
110 | 230 | 0.13 ~ 0.15 |
120 | 248 | 0.10 ~ 0.12 |
130 | 266 | 0.08 ~ 0.09 |
▷Type : Thermistor type
Temperature[⁰C(⁰F)] | Resistance(kΩ) |
-40(-40) | 811.1-956.8 |
-20(-4) | 255.6-287.7 |
0(32) | 91.5-98.8 |
20(68) | 36.6-38.0 |
30(86) | 23.8-24.7 |
40(104) | 15.7-16.6 |
50(122) | 10.6-11.3 |
60(140) | 7.2-7.9 |
80(176) | 3.6-4.0 |
▷ Type: Piezo-resistive pressure sensor type
Pressure [kPa (kg/cm² / psi)] | Output Voltage (V) [Vref = 5V] |
32.5 (0.33, 4.71) | 0.5 |
284 (2.90, 41.19) | 4.5 |
▷ Type: Thermistor type
Temperature | Resistance (㏀) | |
℃ | ℉ | |
-40 | -40 | 48.14 |
-20 | -4 | 14.13-16.83 |
0 | 32 | 5.79 |
20 | 68 | 2.31-2.59 |
40 | 104 | 1.15 |
60 | 140 | 0.59 |
80 | 176 | 0.32 |
100 | 212 | 0.19 |
110 | 230 | 0.145 ~ 0.149 |
120 | 248 | 0.12 |
NON- ISG Type
Item | Specification |
Type | Magnetic field sensitive type |
Coil Resistance (Ω) | 819 ~ 1001 [20°C (68℉)] |
Pin | 2 |
With ISG Type
Item | Specification |
Type | Hall effect type |
Air Gap (mm) | 0.9 ~ 1.1 |
Pin | 3 |
Item | Specification |
Type | Hall effect type |
Supply Current (mA) | 5.6 ~ 10 |
Pin | 3 |
Item | Specification |
Resistance(㏁) | 4.87 |
Capacitance (pF) | 850 ~ 1150 |
Type | Piezo-electricity |
Pin | 2 |
HO2S [Bank 1/Sensor 1]
Item | Specification |
Heater Resistance (Ω) | 2.4 ~ 4.0 [20℃(68℉)] |
Type | Linear |
Pin | 6 |
HO2S [Bank 1/Sensor 2]
Item | Specification |
Heater Resistance (Ω) | Approximately 9.0 [20℃(68℉)] |
Type | Binary |
Pin | 4 |
Item | Specification |
Rated Voltage (V) | 5 |
Operating Voltage (V) | 4.75 ~ 5.25 |
Connector | 3 |
Pressure | Output Voltage (V) [Vref=5V] | |
bar | [MPa (kgf/cm², psi)] | |
0 | 0 (0, 0) | 0.5 |
140 | 14 (142, 2031) | 2.5 |
280 | 28 (286, 4061) | 4.5 |
Accelerator Position | Output Voltage (V) [Vref = 5V] | |
APS1 | APS2 | |
C.T | 0.7 ~ 0.8 | 0.29 ~ 0.46 |
W.O.T | 3.85 ~ 4.35 | 1.93 ~ 2.18 |
Item | Specification |
Supply Voltage (V) | 4 ~6 |
Item | Specification |
Coil Resistance (Ω) | 0.3 ~ 100 [20℃(68℉)] |
Maximum Allowable Current (A) | < 10.0 |
Type | DC Motor [Integrated into ETC Module] |
Item | Specification | |
Coil Resistance (Ω) | 1.5 ± 0.075 [20℃(68℉)] | |
Fuel Pressure | bar | 200 ~ 267 |
MPa | 20.0 ~ 26.7 | |
kgf/cm² | 203 ~ 2722.6 | |
psi | 2900 ~ 3872.5 | |
Pin | 2 |
Item | Specification |
Coil Resistance (Ω) | 22.0 ~ 26.0 [20℃(68℉)] |
Pin | 2 |
[Bank 1 / Intake]
Item | Specification | |
Coil Resistance (Ω) | 6.9 ~ 7.9 [20℃(68℉)] | |
Control Current (mA) | 100 ~ 1000 | |
Reted Voltage (V) | 12 | |
Insulation resistance (MΩ) | 50 [DC 500 V/1 Min] | |
Oil Pressure | bar | 2.9 ~ 3.1 |
kPa | 290 ~ 310 | |
kgf/cm² | 2.96 ~ 3.16 | |
psi | 42.1 ~ 44.96 | |
Pin | 2 |
[Bank 1 / Exhaust]
Item | Specification | |
Coil Resistance (Ω) | 6.9 ~ 7.9 [20℃(68℉)] | |
Control Current (mA) | 100 ~ 1000 | |
Reted Voltage (V) | 12 | |
Insulation resistance (MΩ) | 50 [DC 500 V/1 Min] | |
Oil Pressure | bar | 2.9 ~ 3.1 |
kPa | 290 ~ 310 | |
kgf/cm² | 2.96 ~ 3.16 | |
psi | 42.1 ~ 44.96 | |
Pin | 2 |
Item | Specification |
Max Current (A) | > 6.0 |
Coil Resistance (Ω) | 2.4 ± 0.36 |
Supply Voltage (V) | 13.5 |
Supply Voltage Range (V) | 9 ~ 16 |
Operating Frequency (kHz) | 0.9 ~ 1.1 |
Item | Specification |
Coil Resistance(Ω) | 28.3-31.1 [20℃(68℉)] |
Pin | 2 |
Item | Specification | |
Coil Resistance (Ω) | 0.54 [20°C(68°F)] | |
Pin | 2 | |
Peak Current (A) | 5.3 | |
Holding Current (A) | 2.68 | |
High Pressure Fuel Pressure | bar | 20 ~ 200 |
MPa | 2 ~ 20 | |
kgf/cm² | 20.4 ~ 203.9 | |
psi | 290.1 ~ 2900.8 |
Item | Specification | |
Ignition Timing (˚) | BTDC 0˚ ± 10˚ | |
Idle Speed (rpm) | A/C OFF (Neutral, N, P-range) | 850 ± 100 |
A/C ON | 850 ± 100 |
Item | kgf.m | N.m | lb-ft |
ECM bracket mounting bolt / nut | 1.0-1.2 | 9.8-11.8 | 7.2-8.7 |
ECM mounting nut | 1.0-1.2 | 9.8-11.8 | 7.2-8.7 |
Electronic Throttle Control (ETC) moule mounting bolt | 1.0-1.2 | 9.8-11.8 | 7.2-8.7 |
Manifold Absolute Pressure Sensor (MAPS) mounting screw | 0.65-0.85 | 6.4-8.3 | 4.7-6.1 |
Intake Air Temperature Sensor (IATS) mounting screw | 0.65-0.85 | 6.4-8.3 | 4.7-6.1 |
Boost Pressure Sensor (BPS) mounting bolt | 0.7-1.1 | 6.9-10.8 | 5.1-8.0 |
Engine Coolant Temperature Sensor (ECTS) | 3.0-4.0 | 29.4-39.2 | 21.7-28.9 |
Crankshaft Position Sensor (CKPS) mounting bolt | 1.0-1.2 | 9.8-11.8 | 7.2-8.7 |
Camshaft Position Sensor (CMPS) [Bank 1 / Intake] mounting bolt | 1.0-1.2 | 9.8-11.8 | 7.2-8.7 |
Camshaft Position Sensor (CMPS) [Bank 1 / Exhaust] mounting bolt | 1.0-1.2 | 9.8-11.8 | 7.2-8.7 |
Knock Sensor (KS) mounting bolt | 1.9-2.5 | 18.6-24.5 | 13.7-18.1 |
Heated Oxygen Sensor (HO2S) [Bank 1 / sensor 1] | 4.0-5.0 | 39.2-49.1 | 28.9-36.2 |
Heated Oxygen Sensor (HO2S) [Bank 1 / sensor 2] | 4.0-5.0 | 39.2-49.1 | 28.9-36.2 |
Rail Pressure Sensor (RPS) | 3.1-4.1 | 30.0-35.0 | 22.1-29.5 |
Accelerator Pedal Position Sensor (APS) mounting nut [APS integrated into Accelerator pedal module] | 1.3-1.6 | 12.7-15.7 | 9.4-11.6 |
Accelerator Pedal Position Sensor (APS) mounting bolt [APS integrated into Accelerator pedal module] | 0.9-1.04 | 8.8-13.7 | 6.5-10.1 |
Purge Control Solenoid Valve (PCSV) bracket mounting bolt | 1.0-1.2 | 9.8-11.8 | 7.2-8.7 |
CVVT Oil Control Valve (OCV) [Bank 1 / Intake] mounting bolt | 1.0-1.2 | 9.8-11.8 | 7.2-8.7 |
CVVT Oil Control Valve (OCV) [Bank 1 / Exhaust] mounting bolt | 1.0-1.2 | 9.8-11.8 | 7.2-8.7 |
Electric Waste Gate Actuator (EWGA) mounting bolt | 0.6-0.8 | 6.0-8.0 | 4.4-5.9 |
RCV control solenoid valve bracket mounting bolt | 1.0-1.2 | 9.8-11.8 | 7.2-8.7 |
Item | kgf.m | N.m | lb-ft |
Fuel tank mounting nut | 4.0-5.5 | 39.2-54.0 | 28.9-39.8 |
Fuel pump plate cover mounting bolt | 0.2-0.3 | 2.0-2.9 | 1.4-2.2 |
Filler-neck assembly mounting bolt | 0.8-1.2 | 7.8-11.8 | 5.8-8.7 |
Filler-neck assembly bracket mounting bolt | 0.4-0.6 | 3.9-5.9 | 2.9-4.3 |
Delivery pipe & injector assembly mounting bolt | 1.9-2.4 | 18.6-23.5 | 13.7-17.4 |
High pressure fuel pipe flange nut | 2.7-3.3 | 26.5-32.4 | 9.5-23.9 |
High pressure fuel pipe function block mounting bolt | 1.0-1.2 | 9.8-11.8 | 7.2-8.7 |
High pressure fuel pump mounting bolt | 1.3-1.5 | 12.8-14.7 | 9.4-10.9 |