4.
Remove the installation bolt (B), and then remove the sensor.
[Bank 1/Intake]
[Bank 1/Exhaust]
DON’T remove the camshaft position sensor during engine running or right after engine stops, or a scald by the flowed out engine oil may occur.
Turn ignition switch OFF and disconnect the battery negative (-) terminal.
Remove the cleaner.
(Refer to Engine Mechanical System - "Air Cleaner")
Disconnect the camshaft position sensor connector (A).
Remove the installation bolt (B), and then remove the sensor.
[Bank 1/Intake]
[Bank 1/Exhaust]
