Removal
note

Note that the SST (Part No.: 09392-2H100 or 09392-1Y100) is useful when removing the heated oxygen sensor.

[Bank 1 / Sensor 1]
1.

Turn the ignition switch OFF and disconnect the battery negative (-) terminal.

2.

Disconnect the connector (A), and then remove the sensor (B).

[Bank 1 / Sensor 2]
3.

Turn the ignition switch OFF and disconnect the battery negative (-) cable.

4.

Disconnect the connector (A), and then remove the sensor (B).

Яндекс.Метрика