2.
Keep the ETC module plate (A) open.
Remove the ETC Module.
(Refer to Engine Control System - "ETC System")
Keep the ETC module plate (A) open.
Clean the pollutant in the throttle body using a soft cloth moistened with clearning fluid.
Do not directly spray cleaning fluid to ETC module. Instead, use a lint free cloth moistened with cleaning fluid.
Be careful not to remove the coating fluid around the shaft. If coating fluid is removed, idling control failure may occur due to inflow of foreign substances or excessive air leakage.
After cleaning, reinstall the ETC module and then perform the ETC module learning procedure.
(Refer to Engine Control System - "ETC System" - Adjustment)
