Install the component to the specified torques.
Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
When cleaning the throttle body, clean the valve and carbon at the bore using a cloth moistened with cleaner.
Do not spray the engine cleaner on the throttle body.
Be careful as fingers or cloth may get caught in the valve.
When installing the throttle body, keep foreign materials away from the throttle body.
Fill with engine coolant. (Refer to “Cooling System” in EM group).
Install in the reverse order of removal.
Electronic Throttle Control module mounting bolt :
9.8-11.8 N.m (1.0-1.2 kgf.m, 7.2-8.7 lb-ft)
