1.
Open the fuel filler door and then remove the filler-neck mounting screws (A).
Filler-neck assembly mounting screw :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Open the fuel filler door and then remove the filler-neck mounting screws (A).
Filler-neck assembly mounting screw :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Lift up the vehicle.
Remove the rear left wheel, tire and the inner wheel house.
Remove the ventilation hose extension bracket (A) after loosening the mounting nut (B).
Disconnect the fuel filler hose (A), the leveling hose (B) and the ventilation hose (C).
Remove the filler-neck assembly (A) from the vehicle after removing the bracket mounting bolt.
Filler-neck assembly bracket mounting bolt :
3.9-5.9 N.m (0.4-0.6 kgf.m, 2.9-4.3 lb-ft)
Install in the reverse order of removal.
