2.
Remove the WGT control solenoid valve (A) in the direction of the arrow.
Turn ignition switch OFF.
Disconnect the WGT control solenoid valve connector.
Measure resistance between terminal 1 and 2 of the valve.
Check that the resistance is within the specification.
Specification: Refer to Specification section.
Turn the ignition switch OFF and disconnect the battery (-) terminal.
Remove the WGT control solenoid valve (A) in the direction of the arrow.
Disconnect the WGT control solenoid valve connector (A) and vacumm hoses (B).
Remove the WGT control solenoid valve.
Install is reverse of removal.
