Install the component to the specified torques.
Note that internal damage may occur when the component is dropped. In this case, use it after inspecting.
Apply the engine coolant to the O-ring.
Be careful not to damage the O-ring.
Insert the sensor in the installation hole and be careful not to damage it during installation.
Be careful not to damage the sensor housing and the connector.
Install in the reverse order of removal.
Camshaft position sensor mounting bolt:
7.8 ~ 9.8 N.m (0.8 ~ 1.0kgf.m, 5.8 ~ 7.2 lb-ft)
